Insulated and Refrigerated Beverage Transport Line (python) - Denver - water wells

Dairy, beer, water or other liquids, between 30 and 131F, whiel in transport. 828' insulated rolls. 
Tubing Manufactured in 2007. Unused. Manufactured for a well known Brewer. 
$ 9.75 ft  or $ 2,000 per roll 328 ft. 

May consider partial trades

High-performance Insulated Jacket Python 
Launched in 1999 in response to your needs to dispense colder drinks and optimise cooler performance, there are now over 3 million metres of high-performance insulated jacket python installed worldwide.
Proven Benefits 
Over 15% improvement in insulation performance over taped python. This means: 
Reduced heat gain per metre of python 
Reduce load on cooler 
Low energy consumption by cooler 
Improved cooler efficiency 
System can dispense a greater number of cold drinks "in spec" 

Tough tear-resistant jacket means:

Reduced risk of damage to insulation during installs 
Fewer "snags" caused by overlapped tape 
Jacket can be removed when making connections without shredding insulation 
New in 2002 
A new super-smooth jacket python - Valpar Easy-Fit - was launched in 2002. Easy-Fit has all the benefits of our standard jacket, plus a super-smooth jacket. This means: 

Reduced friction during installation

Easier installation of one single python 
Easier to install two pythons in one duct 
May reduce pull through times for installers 
Brewmaster (nylon-lined stripe) product lines 
Tubing Choice 
The python is composed of a cluster of product lines, which are carefully positioned around water or glycol recirculation lines to give optimum cooling efficiency. The water/glycol recirculation lines are designed to take heat out of the product lines. The lines are held tightly in configuration by the application of food approved bundle wrap.

Insulation 
The outside of the wrapped tubing cluster is then covered by flexible closed cell foam insulation. The low thermal conductivity of the insulation reduces heat absorption from the surrounding ambient temperature. 
A PVC tape wrapping protects the insulation, Valpar insulated taped python. 
The combination of insulation and the cooling recirculation lines help to ensure that the beverage is dispensed at the correct temperature. 
The purpose of a Phython is to provide ice cold beer to places removed from the keg cooling area. There are three types of systems used to provide cold beer at long distances: These are:

Features 
Ultra-smooth nylon inner layer 
Low gas permeability 
Highly flexible compared to solid nylon tubes 
Highly engineered for consistent quality tubing 

Superb adhesion between all layers with high resistance to delamination

Benefits 
Reduced bacterial growth and yeast adhesion so that the taste and quality of your beer is maintained 
Extended cleaning cycles or improved and easier cleaning â€" this saves money and improves beer quality 
Improved carbonation levels of dispensed product 
Suitable for tight bend radius applications 
Compatible with a wide range of fittings 
Moisture Barrier Wrap Prevents condensation from compromising insulation 
BREWMASTER TWO 3/8" or 5/16" I.D. Product Lines: Color coded and identified 
Foil Wrap Conducts cold transfer from glycol lines to product lines 
Smooth Barrier Jacket Does not compress insulation resulting in uncompromised performance 
Glycol Return Line 3/8" I.D. Red hose for easy identification 
Glycol Outgoing Supply Line 3/8" I.D. Blue hose for easy identification 
Insulation Industry standard 3/4" (19 mm) closed cell 
Yellow line-Code master 6.7mm X 9.5mm 3/8 to 0.265 MA 
Violet 6.7mm 9.5 . 0265 x 0.375 CELLI S. P. A MA 
Blue (line) Brew master 2 1/2 X 3/8 MRC0508508 BAM 
Green 16mm X 12.7mm MA 
Blue 16mm X 12.7mm MA 
Red 16mm X 12.7mm MA 
Black Seperated line 16mm X 12.7mm 
All our Pythons are brewery approved and meet the specific requirements of all the leading U.S. breweries. 
All new state of the art hose! Trunk lines are constructed with exclusive Brewmaster Two multi-layer tubing. This innovative tubing has an ultra smooth inner layer to reduce bacterial growth and to insure easier cleaning. In addition, this layer acts as a barrier to prevent loss of carbonation while at the same time preventing flavor migration to other product lines. Bonded layers perform with excellent flexibility. 
All the tubes you have listed were made by Valpar Industrial and all but one are polyethylene. The exception is the Blue (line) Brewmaster 2 which is basically polyethylene with a nylon lining. 
All the tubes have a maximum working temperature of 55oC (131oF) but please note that as the temperature increases, the pressure rating decreases. 
The polyethylene tubes have got good resistance to glycerine up to their maximum working temperature. The Brewmaster tube has also good resistance at room temperature but a reduced resistance at 131oF. 
All lengths of trunk line are shipped by truck. The are not shipped by mail or UPS. Once cut to your specified length they cannot be returned. 
3/8" Trunk Line Assemblies 
These are special order items and must be shipped by truck. Once cut they are not returnable for any reason. Be sure of what you want and how long you want it before ordering. 

keywords: Valpar, Industrial, Python, Beverage, Industrial Tubing. brew, malt, hops, distill, Breweries, Soft Drink, fast food, chains,Tubing for glycol, Glycomaster, Hose,Beer Dispensing Equipment, Beer, Home Bar, Glycol, Glycol Beer System, Beer Font, mobile Bars, Draught, Beer Cooler, Beer System Installation Beer system, Beer Tap, Beer System Servicemead, lager, ale, cider, milk, dairy